Dek-King DIY

Dek-King Bond

If you fancy having a go at creating a deck yourself then Dek-King Bond is for you. It is a tongue and groove system that is glued together and a separate adhesive to bond to your substrate. The range of profiles are below and a picture showing where each profile might be used to help you with your order.

The coils are available in 10 metre lengths and worth noting that one 10 metre coil of the 50mm profile is equal to ½ a square metre. For the adhesives - 1 tube of the Joining Adhesive is enough for about 2 square metres and 1 tube of the Bedding Adhesive covers approx. 0.6 of a square metre.

Download Our Free DIY PDFs



50mm wide with a black caulking


50mm wide margin profile with a rounded edge and black caulking


50mm wide margin profile with a rounded edge and no caulking


70mm wide 'L' bullnose profile with black caulk


5mm wide black 'T' caulking strip for mitre cuts and curve corners


150mm wide - 3 plank profile with a black caulking


125mm wide solid King Plank. For curve corners where the edge will be visible


Bullnose profile, used to face against steps

Stelmax 1985

A clear adhesive used to bond the profiles together

Dek-King Adhesive

A MS-Polymer adhesive used to bond the profiles to the substrate, available in black or white

Adhesive Gun

Applicator gun for 600ml sausages


Extendable roller for professional fitting

Specialist Cutters

Very practical cutters for use with Sea-Dek products

Masking Tape

25mm by 50m, with a very good adhesion to Sea-Dek products

Knife Blades

Standard and Curved craft knife blades